Common Problems In Nothing Phone 1 & THEIR PROVEN FIXES!

Hey, friends welcome back to the amazing article, Today in this article, we will troubleshoot common problems in Nothing Phone 1.

Before proceeding to the post, let us know some of the specs of this phone.

Nothing Phone 1 is a recently launched phone, it comes with a 6.55-inch OLED FHD+ display with a 120Hz refresh rate and 1080 x 2400 pixels display resolution.

The Nothing Phone 1 is powered by the latest Octa-core latest Qualcomm Snapdragon 778G+ 5G (6 nm) processor and according to GSMarena, it has been launched in three variants.

Talking about the battery and operating system, the Nothing Phone 1 runs on the Nothing OS based on Android 12, and is powered by a 4500 mAh battery with 33W normal charging.

As far as cameras are concerned.

The Nothing Phone 1 has a Dual-camera setup, with a 50-megapixel primary camera, and then a 50-megapixel ultrawide camera.

That’s It 🙂

After using the Nothing Phone 1 device, many users are facing common issues and problems with the Nothing Phone 1.

But don’t worry, in today’s guide, I will tell you the troubleshooting of Common Problems In the Nothing Phone 1 and give a proven solution.

Troubleshoot Common Problems In Nothing Phone 1: Network, Heating, Camera, and More

First of all, in this article, we will discuss various common issues and problems with the Nothing Phone 1 and also know the solutions to fix them.

All the steps and remedies that I have described below are tested and proven methods, so read this article till the end.

Don’t worry, I’ve shared 12 plus different common problems and their solutions, a problem that almost everyone faces.

I am sure that with this guide today you will definitely get a solution to the problem happening on your phone.

Please read all the steps and remedies included in this article carefully, please do not rush! This guide will eventually help you.

Issue – Network problem in Nothing Phone 1

If you are facing a network problem on your Nothing Phone 1? So don’t worry, below I have listed some effective tips that you can try to fix the network problem on your Nothing Phone 1.

Solutions:

• Turn the airplane mode on and off for a few seconds.
• Try turning off your SIM card for some time and then turning it on.
• Make sure to check your device in Safe mode. Here’s a comprehensive Guide
• Once, Reset your device network settings.
• Also, update the software to the latest version.
• If your problem is still not resolved, then the last option is to factory reset your Nothing Phone 1.
• That’s It 🙂

Read Here: Network problems in Realme X7 5G, How to Fix Them!

Problem – Overheating problem in Nothing Phone 1?

Whenever you play games or use features or apps that require a lot of power, your phone also fast drain battery, due to which your phone may become temporarily heated up and warm.

Solutions:

• If you are not using Wi-Fi, GPS, Bluetooth, and other connectivity options, turn them off.
• Turn Off auto-brightness and decrease screen brightness.
• Clear all the apps you are not using.
• Uninstall the unnecessary applications installed on the phone.
• Check your device in Safe Mode.
• Update your software in the latest version, if available
• If you follow all the above steps and your problem is still not fixed then the last option is to factory reset your Nothing Phone 1.
• That’s It 🙂

Problem – A sluggish or Lagging User Interface in Nothing Phone 1

Solutions:

• Remove the application you are not using from the Recent tab.
• Once, Restart your Nothing Phone 1. This closes unnecessary processes running in the background.
• If you have battery saver mode turned on in your phone, turn it off.
• Do not play games and don’t open any application while charging the phone.
• Clear the System cache partition of the Nothing Phone 1.
• Do you have still problems with the Touch screen? If it is, then the last option is to factory reset your Nothing Phone 1.
• That’s It 🙂

Must Read: Overheating problem in Motorola Moto E30, How to Fix It!

Issue – Nothing Phone 1 Battery Draining Fast

Many people have this problem if you are also facing the problem of battery drain with your Nothing Phone 1.

To fix the problem of battery drain on your Nothing Phone 1, follow the steps given below:

Solutions:

• First of all, turn off auto-brightness, and Decrease the brightness according to your need.
• Make sure to choose the minimum screen timeout time.
  • Go to Settings → Display → Screen timeout → Select Minimum Screen time (Recommended 30 Seconds)
• Enable Power Saving Mode.
• Optimize your all apps.
  • Go to Settings →  Battery and device care → Tap on Optimize now
• That’s It 🙂

Problem – Apps Crash Suddenly on the Nothing Phone 1

Since the launch of this smartphone, the users of the Nothing Phone 1 have been facing this app crash problem:

Don’t worry, the problem of this app crash is not only happening on the Nothing Phone 1 phone, but other smartphones have also shown this error.

Solutions:

• First, Reset App Preferences.
  • To do: Go to Settings → Apps → Tap the Three dots → Finally, Tap Reset App Preferences.
• Make sure if there is a new software update on your phone, install it if new software update is available.
• If your phone is facing any problem due to a single application, then you can Go to Settings → Apps and Select that app then clear its data and cache.
• Restart your device once after following all these steps.
• That’s It 🙂

Issue: Touch screen issues on Nothing Phone 1

If you are experiencing slow or unresponsive touch screen issues on your Nothing Phone 1, I have listed some quick steps below that you can use to fix your problem.

Solutions:

• First, Restart your Device and check whether your problem is fixed or not.
• Make sure to neat and clean your phone screen.
• Remove the old screen protector.
• Check your Nothing Phone 1 in Safe Mode.
• Clear the System cache partition of the phone.
• Do you have still problems with the Touch screen? If it is, then the last option is to factory reset your Nothing Phone 1.
• That’s It 🙂

Problem – Fingerprint sensor not working Nothing Phone 1

In many forums and discussion sites, Nothing Phone 1 users have reported problems with the device’s fingerprint reader.

This problem can happen due to many reasons, let us know the ways to fix this problem:

Solutions: 

• Make sure you are using the same finger that you used when setting up the fingerprint.
• This problem is also caused by a malfunction of your phone’s fingerprint sensor, check if the fingerprint sensor is scratched or damaged.
• Remove the old fingerprint in your Nothing Phone 1 and add a new fingerprint.
  • Go to Settings → Biometrics and Security → Fingerprints → Enter your old PIN, pattern, or password → Registered fingerprint → Remove and Tap Remove again → Add new fingerprint.
• Do you have still problems with the fingerprint sensor? If it is, then you can clear the cache partition of the phone.
• That’s It 🙂

Must See: Fix Fingerprint sensor not working in Poco M4 Pro 5G?

Issue – Unable To Send Text Messages on Nothing Phone 1

Solutions:

• First of all, check whether the number you want to send the message to is not blocked.
• Clear the cache of the default message app of your Nothing Phone 1.
• If you do not need the old messages, delete them.
• Once, Restart your Nothing Phone 1 and check whether your issue is fixed or not.
• Turn on flight mode and again Turn Off.
• That’s It 🙂

Problem – Unable to make and receive phone calls on Nothing Phone 1

Solutions:

• Remove the SIM card from your phone and insert it again.
• Once, Reboot your device.
• If there is a new software update available on your Nothing Phone 1, then install it.
• Check if flight mode is on in your Nothing Phone 1, if it is on then turn it off.
• Reset your phone Network settings.
• That’ It 🙂

Issue – Bluetooth not working in Nothing Phone 1?

Many times Bluetooth is turned off due to low battery or Bluetooth not being enabled in the phone.

Solutions:

• Make sure to check for new software updates.
• Also, make sure to Verify the Bluetooth device is Turned on and Bluetooth is enabled on both devices.
• Both phones must be nearby to connect to Bluetooth, so check the Bluetooth connection range.
• Once, Restart both devices.
• If your problem is not solved then Reset your device’s Network Settings.
• That’s It 🙂

Read Here: Bluetooth not working properly in Poco F4 GT? How to Fix It!

Problem – Microphone not working on Nothing Phone 1

Solutions: 

• First, Restart the phone and record the voice to check if the microphone is OK? If you like the sound quality of the recorded voice, then the microphone is fine.
• Once, Boot your phone in safe mode, if your phone’s microphone works well in safe mode, then the problem is with any third-party application downloaded, uninstall it.
• Ensure that no new software update is available on your phone, install it if available.
• If your problem is still not resolved, then factory reset your Nothing Phone 1.
• That’s It 🙂

Issue – Nothing Phone 1 is constantly freezing or crashing

If your Nothing Phone 1 phone is constantly freezing or crashing then it seems very bad and disappointing.

But don’t worry, to fix this problem I have outlined some troubleshooting steps below that can help fix your problem without sending your phone to a Motorola service center.

Solutions:

• First, Force reboots your Nothing Phone 1.
  • Press and hold the Volume Down Button and the Power Button simultaneously for a few seconds.
• Make sure to Update your Software Version to the Latest Version.
• Once, Boot your device in Safe Mode. Here’s Guide
• If a particular application is causing this problem in your Nothing Phone 1, then you can try to clear the cache and data of those applications.
  • Go to Settings → Apps → Select the Crashing App → Storage → Clear Cache & Clear Data
• If your problem is still not resolved, then factory reset your Nothing Phone 1.
• That’s It 🙂

Check Out: How to Fix Touch screen issues on Redmi Note 11 Pro?

Troubleshooting Steps for Nothing Phone 1

These are simple troubleshooting steps, many problems are solved by trying them, will definitely try them once.

Boot your device into Safe Mode

• First, press and hold the Power button and Volume Up button at the same time.
• Then you will see a popup window in which you have to press and hold the Power Off option for a few seconds.
• Now you will get the option of Rebooting to Safe Mode.
• Simply Top on the OK button then your phone will boot into Safe Mode.
• That’s It 🙂

Reset your device Network settings

• First, Go to Settings.
• Then Tap on the System.
• Tap on Reset Options.
• Now Tap Reset Wi-Fi, Mobile & Bluetooth.
• Finally, Tap Reset Settings, and again Tap Reset Settings.
• That’s It 🙂

 Factory Reset your device

• First, Go to the Settings App.
• Then Tap on the System → Reset Options.
• Tap on Erase All Data (Factory Reset)
• Now click on Erase All Data, then enter your phone’s screen lock.
• Finally, Tap Erase All Data.
• That’s It 🙂

---

Conclusion:

So in this guide, I have discussed all the common problems in Nothing Phone 1. I have shown you some key issues above and a proven solution to fix them. I hope you liked this article.

If you are facing any other problems with your Nothing Phone 1, then be sure to tell it in the comment section below.

I will try to resolve your issue as soon as possible and thanks for staying up to the end with this guide.